Products information
machine frame
made of aluminum profile (item)
- Cover plate made of stainless steel 1.4301
- Dimensions 510 x 450 x 490 mm wxdxh
control
the controls and controls are in that
Integrated machine housing.
The following controls with the listed functions are installed:
- Frequency converter 0.2 kW, 1.5 A to control the motor
- Toggle switch (illuminated green) for power ON / OFF
- Toggle switch (black) engine start / stop
- Toggle button (black) tip forward / backward
- Knob with potentiometer for the system speed
5 - 36 rpm (cutter)
- Spiroplan gear motor 0.1 kW (SEW)
Single chamber drum type 17/8/1
- Vol. 1 x 1.5 l
- Dimensions: width across flats = 170 mm, length = 80 mm
- Transparent PVC sheath, material thickness = 6 mm
- PVC transparent side walls, material thickness = 8 mm
- Aluminum flange attached to the working drum with screws
- 1 clamping bracket made of stainless steel 1.4301 for
Closing the drum
- 1 piece drum cover made of stainless steel 1.4301 and plastic
with foam rubber seal
Quick drum change system with clamping hub:
A clamping hub is integrated in the drum flange.
This can be opened with a hex key.
The drum can then be removed from the motor shaft
Separating sieve size 1
- made of stainless steel 1.4301, perforation 8 mm
- with 4 plastic glides to hang up on
tub
- Dimensions 460 x 240 x 130 mm
Plastic tub size 1
- Made from PE
- Dimensions 450 x 255 x 105
Accessories initial filling
- 2 kg grinding wheel
- 5 kg ball mixing
- 1 kg grinding compound
- 1 kg of polishing compound
made of aluminum profile (item)
- Cover plate made of stainless steel 1.4301
- Dimensions 510 x 450 x 490 mm wxdxh
control
the controls and controls are in that
Integrated machine housing.
The following controls with the listed functions are installed:
- Frequency converter 0.2 kW, 1.5 A to control the motor
- Toggle switch (illuminated green) for power ON / OFF
- Toggle switch (black) engine start / stop
- Toggle button (black) tip forward / backward
- Knob with potentiometer for the system speed
5 - 36 rpm (cutter)
- Spiroplan gear motor 0.1 kW (SEW)
Single chamber drum type 17/8/1
- Vol. 1 x 1.5 l
- Dimensions: width across flats = 170 mm, length = 80 mm
- Transparent PVC sheath, material thickness = 6 mm
- PVC transparent side walls, material thickness = 8 mm
- Aluminum flange attached to the working drum with screws
- 1 clamping bracket made of stainless steel 1.4301 for
Closing the drum
- 1 piece drum cover made of stainless steel 1.4301 and plastic
with foam rubber seal
Quick drum change system with clamping hub:
A clamping hub is integrated in the drum flange.
This can be opened with a hex key.
The drum can then be removed from the motor shaft
Separating sieve size 1
- made of stainless steel 1.4301, perforation 8 mm
- with 4 plastic glides to hang up on
tub
- Dimensions 460 x 240 x 130 mm
Plastic tub size 1
- Made from PE
- Dimensions 450 x 255 x 105
Accessories initial filling
- 2 kg grinding wheel
- 5 kg ball mixing
- 1 kg grinding compound
- 1 kg of polishing compound